Xtreme Gaming Network

Happy Birthday to meeee!

Author Topic: Happy Birthday to meeee!  (Read 2890 times)

Online Phil.8

  • RestrictedRacing
  • Hero Member
  • *
  • Posts: 2366
  • Karma: 38
  • Δ8
    • View Profile
Re: Happy Birthday to meeee!
« Reply #15 on: January 12, 2017, 10:18:10 PM »
yep i set to 100% and let ffb clip do its stuff, I presume that wheel has on baord settings , if so I set mine like this
http://www.racedepartment.com/threads/iracing-optimal-wheel-settings.51360/
Shine On You Crazy Diamond

Online Joe

  • Hero Member
  • *****
  • Posts: 1492
  • Karma: 21
    • View Profile
Re: Happy Birthday to meeee!
« Reply #16 on: January 12, 2017, 10:38:47 PM »
yep i set to 100% and let ffb clip do its stuff, I presume that wheel has on baord settings , if so I set mine like this
http://www.racedepartment.com/threads/iracing-optimal-wheel-settings.51360/

Cool thanks. I just tried the praga and was getting a lot of stong feedback just from the road so dropped down the road effects in ac.

What settings do you have in ac under advanced?

Actually i just remembered I'm using a custom lut generated from my g27. Should change that.
« Last Edit: January 12, 2017, 10:43:06 PM by Joe »

Online Shayne

  • Jr. Member
  • **
  • Posts: 112
  • Karma: 6
    • View Profile
Re: Happy Birthday to meeee!
« Reply #17 on: January 12, 2017, 11:13:32 PM »
I'll have a look at my settings in AC if you want, but I'm pretty sure they are more or less the same as the Fanatec profile. I don't think I'll changed many settings on the wheel either, I'll have a look tomorrow when I'm using it and get back to you if you would like.

One thing you should probably do though if you haven't already, is to go through the setup config for you shifter. There's a guide somewhere showing this on their website. I didn't do this originally and found that the gears weren't being detected correctly. Example would be shaking the gear knob left and right while in 4th would be detected as going 2nd/4th/2nd/4th. I only noticed it when I was racing one time in the street season we had when I was in the skyline. I would shift into 3rd and it wouldn't go into gear because it was detected as 1st gear when I had the clutch in and shifting down into 2nd would sometimes put me into 4th. After configuring the gears, this problem went away.

Online Phil.8

  • RestrictedRacing
  • Hero Member
  • *
  • Posts: 2366
  • Karma: 38
  • Δ8
    • View Profile
Re: Happy Birthday to meeee!
« Reply #18 on: January 12, 2017, 11:28:59 PM »
yep i set to 100% and let ffb clip do its stuff, I presume that wheel has on baord settings , if so I set mine like this
http://www.racedepartment.com/threads/iracing-optimal-wheel-settings.51360/

Cool thanks. I just tried the praga and was getting a lot of stong feedback just from the road so dropped down the road effects in ac.

What settings do you have in ac under advanced?



Actually i just remembered I'm using a custom lut generated from my g27. Should change that.

Gain 100
min force 0
all the fake effect at 0
gamma, filter, speed sen all 1.0
Shine On You Crazy Diamond

Online Joe

  • Hero Member
  • *****
  • Posts: 1492
  • Karma: 21
    • View Profile
Re: Happy Birthday to meeee!
« Reply #19 on: January 12, 2017, 11:30:35 PM »
Cheers shayne. Would be good to know what settings you have too.

I did a firmware upgrade when i plugged it all in and then had to do the shifter calibration to get it working at all so seems all good.

Offline Bruce

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3440
  • Karma: 75
  • "Look out, I'm comin' through!"
    • View Profile
    • Delray and Buttonmania
Re: Happy Birthday to meeee!
« Reply #20 on: January 13, 2017, 10:00:14 AM »
what comes to mind?
envy
awesome
kool

that is a very nice setup.


"I refuse to be what you call normal." Lemmy Caution

Online Shayne

  • Jr. Member
  • **
  • Posts: 112
  • Karma: 6
    • View Profile
Re: Happy Birthday to meeee!
« Reply #21 on: January 15, 2017, 01:20:04 AM »
Wheel Config;
sen: AUF (I don't know what that stays for, but it means it lets the game control the range)
FF: 100
sho: 100
abs: 100
lin: OFF
dea: OFF
drl: OFF
for: 100
spr: OFF
dpr: OFF
brf: 100

Assetto Corsa Config;
Gain: 100%
Filter: 0%
Minimum Force: 0%
Kerb Effects: 50%
Road Effects: 30%
Slip Effects: 0%
Enhanced Understeer Effect: Unticked

Steering Settings
Gamma: 1.00, Filter 0.00, Speed Sensitivity: 0.00

Pedal Settings
Brake Gamma: 1.00

Both the steering settings and pedal settings are all the way to the left on the slider but I listed them anyway.

Online Joe

  • Hero Member
  • *****
  • Posts: 1492
  • Karma: 21
    • View Profile
Re: Happy Birthday to meeee!
« Reply #22 on: January 15, 2017, 08:03:31 AM »
Cheers shayne. I have mine pretty nice now. It just feels so much stronger than the g27 that my shoulders get sore. May as well cancel my gym membership  ;D

Mine are similar, I don't have abs on and i have for, spr and dpr all set to 100. I tried turning all 3 off at one point and had zero FFB, so I turned them all back on. for me sen shows as AUt for auto.

In AC I've turned kerb, road and slip effects all off because as I've been reading they are 'fake' effects to give you additional feedback through the wheel. Having them off should give you the correct feel for the car.

EDIT: Just quickly experimented with for, spr and dpr and seems for AC for is the only setting that makes any difference.
« Last Edit: January 15, 2017, 09:14:48 AM by Joe »

Online Phil.8

  • RestrictedRacing
  • Hero Member
  • *
  • Posts: 2366
  • Karma: 38
  • Δ8
    • View Profile
Re: Happy Birthday to meeee!
« Reply #23 on: January 15, 2017, 10:13:10 AM »
Wheel Config;
sen: AUF (I don't know what that stays for, but it means it lets the game control the range)
FF: 100
sho: 100
abs: 100
lin: OFF
dea: OFF
drl: OFF
for: 100
spr: OFF
dpr: OFF
brf: 100

Assetto Corsa Config;
Gain: 100%
Filter: 0%
Minimum Force: 0%
Kerb Effects: 50%
Road Effects: 30%
Slip Effects: 0%
Enhanced Understeer Effect: Unticked

Steering Settings
Gamma: 1.00, Filter 0.00, Speed Sensitivity: 0.00

Pedal Settings
Brake Gamma: 1.00

Both the steering settings and pedal settings are all the way to the left on the slider but I listed them anyway.

I dont know how you handle the canned effect being on
Shine On You Crazy Diamond

Online Shayne

  • Jr. Member
  • **
  • Posts: 112
  • Karma: 6
    • View Profile
Re: Happy Birthday to meeee!
« Reply #24 on: January 15, 2017, 03:44:58 PM »
What do you mean the canned effect?

I honestly haven't played with it all too much, it felt ok so I've left it as is for some time.

Online Joe

  • Hero Member
  • *****
  • Posts: 1492
  • Karma: 21
    • View Profile
Re: Happy Birthday to meeee!
« Reply #25 on: January 15, 2017, 03:57:08 PM »
Pretty sure phil is referring to what i called fake effects in ac. Road, curb and slip.

Online Shayne

  • Jr. Member
  • **
  • Posts: 112
  • Karma: 6
    • View Profile
Re: Happy Birthday to meeee!
« Reply #26 on: January 15, 2017, 04:25:41 PM »
Ahh ok,

well I'll turn them off and see how I go next time I'm in AC. Pretty sure that's just how they start on the preset profile so I left them there.

Yeah my shoulders got a bit sore initially too, but mostly it was my legs when I hadn't softened the brake pedal. I have that set as soft as it can be now and it's fine. Initially it was so hard to push down to 100% brake that after an hour of racing my leg was aching.

Online Joe

  • Hero Member
  • *****
  • Posts: 1492
  • Karma: 21
    • View Profile
Re: Happy Birthday to meeee!
« Reply #27 on: January 15, 2017, 04:56:06 PM »
Which pedals do you have? The elites?

Online Shayne

  • Jr. Member
  • **
  • Posts: 112
  • Karma: 6
    • View Profile

Online Joe

  • Hero Member
  • *****
  • Posts: 1492
  • Karma: 21
    • View Profile
Re: Happy Birthday to meeee!
« Reply #29 on: January 15, 2017, 08:47:57 PM »
Which pedals do you have? The elites?

https://www.fanatec.com/au-en/pedals/clubsport-pedals-v3-aus.html

Noice. I have the v2s. As you mentioned the brf setting do you have them plugged in via the wheel? They have a higher resolution through usb.